Products: ELPESPEC® Auxiliary Products

• polyamide cup with stainless steel nozzle
• for a fast approximate determination of coating viscosity for roller coating, curtain coating or spray application
• easy to handle
• ideal for production and incoming goods inspection

• for many 1- and 2-pack screen printing inks if no dedicated thinner or retarder is specified
• UV 5000 reduces the viscosity
• UZ 5100 reduces the viscosity and prolongs the screen-open time

• semi-volatile solvent with good solving capacity for many coating materials
• used for thinning or cleaning
• specified and certified quality

• semi-volatile solvent without hydroxyl groups with good dissolving capacity for many coating materials
• used for thinning or cleaning
• specified and certified quality

• prevent and remove static build-up in the pcb printing process
• reduce dust-related errors in screen printing and when processing dry resists
• highly effective, simple and safe to use
• HP 5500 - available in a practical spray can
• HP 5501 for application by spraying, dipping or with a brush or cloth

• spray to dissolve dried printed circuit coatings from screens, no need for complicated washing proceses to clean screens after work breaks
• highly effective, fast action
• silicone- and grease-free, thus no occurrence of surface defects/dewettings or smearing in the subsequent printing process

• for use in automatic screen washers, extremely high flash point (> 100 °C)
• low vapour pressure < 0.1 hPa at 20 °C, thus no VOC (Volatile Organic Compound) per the EU directive 1999/13/EC
• not classified according to CLP Regulation (EC) no. 1272/2008, easily biodegradable in acc. with OECD Test 301 A

• fast and intensive cleaning effect
• R 5814/R 5817: Removes coatings from screens, tools and after print errors; R 5814 is lower in odour than R 5817 while R 5817 has a quicker cleaning effect
• R 5821: High flash point (+32 °C), suitable for use in automatic screen washers and for cleaning ink processing equipment

• polyester strips with different accurately defined density steps
• for determination of exposure parameters

• for defoaming aqueous-alkaline developer solutions, e.g. 1% soda solution
• silicone-free; biodegradable

• suitable for removing exposed or, if necessary, cured photoimageable solder resists (e.g. after incorrect exposure)
• suitable for cleaning coating developers and resist stripper equipment, prepared quantity can be used multiple times

• application by screen printing or brush
• yellow-green 1-pack coating
• UV curing
• auxiliary products recommended: Anti-static spray HP 5500⇗, Cleaning agents R 5899, R 5821 and R 5817⇗

• Application by brush
• Green opaque, mat 1-pack coating
• Dries at room temperature, beneficial for the repair of pcb assemblies after completed soldering as they often must not be exposed to further thermal stress
• Recommended auxiliary product: Cleaning agent R 5817⇗

• applied as a coating on the inside of casings and packagings, it prevents and diverts static charges
• application by brushing or spraying
• dries at room temperature
• auxiliary product recommended: Cleaning agent R 5817⇗

• Conformal coating in theory and practice: Basics, composition of coatings, chemical/physical properties, application and drying processes, evaluations and specifications, characteristics of conformal coatings, corrosion and failure mechanisms, trouble shooting
• author: Dr. Manfred Suppa, Head of Research & Development (1998 - 2016) at Lackwerke Peters GmbH & Co. KG
• order form / flyer

• for the partial covering of assembled PCBs undergoing wave soldering
• easy application from the handy squeeze bottle, ready-to-use
• dries at room temperature
• peelable

• dip cup acc. to DIN 53211: polyamide cup with 4 mm stainless steel nozzle
• for a fast approximate determination of conformal coating viscosity
• easy to handle
• ideal for production and incoming goods inspection

• dispensing pistol and dispensing needles fitting the 30 and 55 ml cartridges of ELPEGUARD dam-and-fill gels
• standard dispensing needle no. 14, Ø 1.60 mm
• standard dispensing needle no. 18, Ø 0.84  mm
• standard dispensing needle no. 22, Ø 0.41 mm
• standard dispensing needle 45° curved, no. 16, Ø 1.65 mm

• cleaning agent for conformal coatings, thick film coatings and gels (if no dedicated cleaning agent is specified in the Technical Report)
• for cleaning of workplace, tools and coating units; rapid and intensive cleaning effect

• cleaning agent for conformal coatings of the series ELPEGUARD SL 1400 ECO-FLZ
• for cleaning of workplace, tools and coating units; rapid and intensive cleaning effect

• cleaning agent for moisture crosslinking silicone coatings
• for cleaning of coating units; rapid and intensive cleaning effect

• for removing solder residues from assembled pcbs

• for the reliable removing of conformal coatings from carriers, e.g. ELPEGUARD conformal coatings based on acrylate/polyurethane/epoxy resins
• high performance
• aqueous, biodegradable
• high user safety

• applied as a coating on the inside of casings and packagings it prevents and diverts static charges
• application by brushing or spraying
• dries at room temperature
• auxiliary product recommended: Cleaning agent R 5817⇗

The Bubble-free kit comes as a aluminium desiccator with polycarbonate lid, manometer and vacuum pump. The transparent lid allows oberservation of the degassing process. Quantities of > 500 g material can be evacuated in one step.

• solvent-free paste for sealing jobs in electronics and electrical engineering
• self-adhesive and permelastic

• adhesion promoters for ELPECAST casting compounds based on epoxy / polyurethane resins

• adhesion promoter for Wepesil casting compounds

• solvent-free, silicone- and grease-free
• auxiliary product in the processing of ELPECAST casting compounds based on epoxy / polyurethane resins
• for pre-treating the surfaces to be potted; after curing, the potting can be removed from the mould easily and without residue

• accelerating agents for Wepuran casting compounds
• shorten the curing time and pot life, thus recommended for mixing and dosing equipment

• for cleaning workplace and tools
• quick and thorough cleaning effect

• for cleaning the "Bubble-free basic" desiccator
• gentle cleaning even of very dirty surfaces soiled with casting compound
• high quality cotton cloth, soft and fluff-free, hard-wearing, absorbent

• applied as a coating on the inside of casings and packagings it prevents and diverts static charges
• application by brushing or spraying
• dries at room temperature
• auxiliary product recommended: Cleaning agent R 5817⇗